Features:
- Sensor operated
- Battery powered retrofit kit
- Easily converts manual flushometer into water saving electronics
- Side-mount-operator-over-the-handle retrofit kit for water closets and urinals
- ADA Compliant battery powered infrared sensor for automatic "hands-free" operation
- Sensor with automatic range adjustment
- Chrome plated metal sensor housing
- Mechanical manual override flush handle
- Four (4) size C batteries included
- "Low battery" flashing LED
- "User in view" flashing LED
- Down-time flush mode
- Vandal resistant 1/8" ball-type hex key included
- 25 to 80 psi operating range
- Infrared sensing with automatic adjustment
- Mechanical manual override
Easy Installation:
Works out of the box and installs in minutes. Simply slide the unit over the flushometer handle and tighten the clamp.
Automatic:
Equipped flushometers provide the ultimate in sanitary protection and automatic operation. There is no need for AC hookups or wall alterations. The flushometer operates by means of a battery powered infrared sensor. Once the user enters the sensor’s effective range and then steps away, the unit initiates the flushing cycle to flush the fixture. State-of-the-art technology enables activation of a manual override without “double flushing” occurring as the user departs (locks out sensor for approximately 10 seconds). 72 hour down-time flush mode keeps fixture fresh during periods of nonuse.
Hygienic:
Automatic flushometer retrofit kit is the next advancement in hygiene. It uses sensor
technology to transform manual installations into electronic, hands-free operation. User makes no physical contact with the flushometer surface except to initiate the override handle when required. Helps control the spread of infectious diseases.
Economical:
Automatic operation provides water usage savings over other flushing devices. Reduces maintenance and operation costs. Installation and battery replacement does not require turning off water to the valve.
Warranty:
3 year (limited)
Specifications:
Control Circuit:
6 VDC input
8 second arming delay
72 hour down-time flush for periods of nonuse
Normal sensor range (recommended for water closets) with 2 - 3 second flush delay:
26” - 32” (660 mm - 813 mm)
Normal sensor range (recommended for water closets) with 1 - 2 second flush delay:
26” - 32” (660 mm - 813 mm)
Reduced sensor range (recommended for urinals) with 1 - 2 second flush delay:
20” - 26” (508 mm - 660 mm)
Sensor type: Active Infrared with automatic adjustment
Battery type: (4) Size C alkaline
Battery life: 2 Years @ 4,000 flushes/month
Indicator lights: User in view/low battery
Operating pressure: 25-80 psi (172-552 kPa)
|
